Tryed both 2tb and 3tb versions.
Western digital my cloud red power light.
Note that you may try a.
After 8 days uptime with my ex2100 i am getting a solid red light on the power button.
I ve changed disk in wd my cloud 2tb to 3tb and performed unbricking with virgin image.
I didn t think that is was such a big deal however after trying to get it to connect through wifi several times for about 6 hours i couldn t get it working.
The drive temps have gone up a bit reaching 40c.
The model number that i have is as follows.
There are a few things you should be aware of if you re going to attempt your own recovery of a wd my cloud with a red light.
I have an issue with wd my cloud and would appreciate any aid.
Hi there today i found wd my cloud s power light turns into red and keeps blinking.
The manual lists indications for a blinking red light but nothing about a solid red light.
The control panel reports everything as healthy.
I checked the router and i found that i am unable to access the dashboard anymore.
Wd my cloud ex2 dashboard 12 tb with two hard drives each hard drive is 6 tb but i have it set up as raid 1.
I was so frustrated.
Power led is solid red firmware 2 10 302 my cloud ex2 hey guys i just updated my firmware related or not my power led is solid red.
I just have a red light.
Can you guys face such issue before.
I tried to reboot device after reboot led was solid blue but 2 min after it turned solid red again.
After a few seconds i guess when device performs hardware check blue led turns to solid red and nothing else happens.
The filesystem is not ntfs fat hfs or any of the others that your typical data recovery software is going to support.
Wd my cloud data recovery challenges.
I have nothing new on my system so nothing was added when i got up just like i said all of a sudden now i have a red light its not flashing.
And my device is not starting.
If you have a network problem forget admin password or are unable to access you wd my cloud a hard reset could solve your problem.
I tried resetting using the reset button at the back turning the power on and off disconnecting from the router etc but nothing seems to work.
It is formatted ext4 which is a linux filesystem the os.
I have a red light on my mycloud box.
During shut down and power up the light blinks blue as normal.