The sand traps dirt and debris and can filter out particles as small as 20 microns.
What do you clean pool filters with.
As you may have guessed with a sand filter the water is filtered through a canister of fine sand.
Body oils and suntan lotions can adhere to the cartridge and simply spraying the filter with the hose doesn t remove them.
Fiber clear is a safe and effective alternative to de.
Types of pool filters.
There are three main types of filter.
If you ve done your homework you ve probably seen pool filter cartridge spray cleaner tools made specifically for well you guessed it cleaning cartridge pool filters.
Pool filter wand the filter flosser or the water wand cartridge cleaner.
But if not i don t see these worth the additional expense.
When cleaning your de filter remember these 3 simple steps.
These all follow the same principle by attaching to a regular garden hose and forcing the water into small pressurized jets.
If you already have one by all means use it.
After removing your pool filter cartridge from the pool filter and rinsing away all grime and residue you may notice it is not fully clean.
Backwash your filter 2.
In order for your sand filter to run properly it must be regularly cleaned and maintained.
After adding de you re done cleaning your de filter.
To clean a filter cartridge manually you can use a garden hose or step it up a notch and check out these pool cartridge cleaning tools.
How and when you clean a pool filter depends on what kind of pool filter you have.
Sand filters are compact affordable and effective mechanisms for keeping your swimming pool clean.
Add new de to your filter.
If you don t know how to do a proper de filter cleaning you might think de is the worst.
Clean the manifold and de grids 3.
But if you don t know how to take care of one you might just want to blow up your pool and be rid of it.
Next prepare a solution of 1 part pool chlorinator to 6 parts water in a large bucket then submerge the filter in the solution and soak it for 3 to 5 days.
Allow your pump to run 30 minutes before turning it off.
It s just another hose attachment to damage or lose.
By preparing to backwash the filter performing a backwash and giving the filter a final rinse you can keep your sand filter running smoothly thus.