Re install the chain and ensure it is long.
What does a bad toilet flapper look like.
As a general rule if you re buying a new toilet it most likely uses a 3 flapper.
It s still easy as pie.
In most cases a newer toilet with a 1 6 or 1 28 gallons per flush will use a 3 flapper.
Look at the flush valve drain opening at the bottom of your tank.
In either case you have to figure out why that toilet fill valve isn t stopping the incoming water flow and if there are broken toilet parts that need attention.
You can rule out the flapper by putting dye in the.
When the flapper goes bad the toilet will either leak water or the toilet s flushing power will diminish.
Fixing your flapper is as easy as dancing to a great jazz tune.
To fix toilet problems you first need to know how a toilet works.
A toilet s flapper valve sits over the large drain opening in the bottom of the toilet s tank regulating when and how much water drains out of the tank and into the bowl.
If you can t seem to find the correct flapper don t like working on your toilet or discover your toilet problems run deeper than the flapper we re happy to help.
If the opening looks about the size of a baseball or orange you need a 2 flapper.
Check the owner s manual or look up the make and model of your toilet to find out for sure what size flapper it uses.
Install the new flapper by attaching the flapper s ears to the pegs on the flush valve.
Installing a larger toilet flapper 3 on a smaller drain opening 2 will not be effective so it is important to.
If you re not light on your feet don t worry.
An older toilet with a 3 5 or 5 gallon flush might require a 2 flapper i like fuildmaster s selection of toilet flappers.
If you don t have a manual and you don t know the make and model measure the size of the existing flapper that you have and try your best to match it with a new one.
What flapper size do i need.
A toilet runs intermittently because the flapper valve opens slightly for a few minutes.
A leaking flapper slowly drains the tank and causes the fill valve to run constantly but the toilet also runs if the fill valve is worn out.
Test fit your flapper before snapping off any pieces or use the old flapper as a visual guide to how your replacement flapper should look.