Walk very slowly along the exterior siding while holding the stud finder.
Finding studs through aluminum siding.
Best way is from the inside.
Ranging in price from 10 to 50 an electric stud finder will locate the center of any stud that that is covered by less.
For example if you locate an interior stud 12 inches from the corner add the thickness of the drywall usually 1 2 inch plus the thickness of the studs which is 3 1 2 inches if the studs are two by fours.
Add another 1 2 inch for the boxing and 3 4 inch for standard lap siding.
Home shop flanged capacitor discharge studs aluminum flanged capacitor discharge studs aluminum 20 00 345 00.
The best way to find a stud while working on on the outside whether brick siding or stone is to use an electronic stud finder.
Cd welding permits stud welding of dissimilar metals.
Using a stud finder on the outside is hit or miss.
Look at the trim for where it has been nailed to a stud.
Using a window as a location guide use a stud finder on the inside to locate a stud or two and transfer that to the outside.
Insulation sheathing vapor barrier.
Print cd flanged pdf.
Too many layers will give you a false reading.
Stud finders are the best way to consistently locate the center of studs.
Draw a mark at the exact location where the stud finder locates a stud.
Aluminum siding manufacturers we carry.
The manufacturers listed above are not available at all locations.
Welds can be made to thin sheet without pronounced distortion burn through or discoloration.
The better way is to locate the edges of the osb sheathing.
Remove the section of siding at the elevation you plan on mounting the awning at.
In theory the siding should be nailed at the studs.
Add the 5 1 4 inch thickness of the wall to the 12 inches.
Since the baseboard is attached to the studs.
A little light will go off or the finder will make a beeping noise when it finds a stud.
Place the stud finder at the edge of the exterior siding.