Don t forget though this is for a commercial property.
Formula for carpeting stairs.
For unique stairwells you might need more.
Say that you ll be carpeting 12 stairs.
Now you can basically choose from two main carpet ideas.
How much carpeting for 13 stairs.
These regulations recommend the stair rise to be no more than 7 75 inches 17 78 cm and stair run to be no less than 10 inches 25 4 cm.
A handrail is a railing that runs up a stair incline for users to hold when ascending or descending a staircase.
Calculating square footage for most rooms in your home is straightforward.
The stair calculator is used for calculating stair rise and run stair angle stringer length step height tread depth and the number of steps required for a given run of stairs.
This may not be practical or necessary for your home where your stairs do not have to meet the same commercial standards but they should be used as.
Therefore for every box stair you require 3 or the width of your stair x 18 of carpet.
This is the total area or square footage for the stairs you plan to carpet.
For convenience and flexibility this stair stringer calculator comes in two forms the automatic and manual click on the icons to determine the best calculator to use for your stairs.
Measure the floor space.
It is typically approximately 3 wide.
Then measure the stair riser from the bottom to the top of the tread and round off to the nearest foot.
Stair width does not include handrails.
Do this for both rooms and add the numbers together.
Multiply width times length.
Stair runners or full.
A guard is a building component or a system of building components located.
Furthermore carpeting gives the stairs an extra dose of coziness and warmth.
If you have kids carpet flooring acts as add an extra layer of protection in case of a fall.
Multiply these two together to determine the.
Just measure length and width and multiply.
A synthetic plush style in twisted or cut pile is always a safe option.
The amount of carpet you need to cover two rooms varies depending on the room size and configuration.
For stairs measure one stair tread from one side to the other side of the rail or wall and then round it off to the nearest foot.
Building codes generally suggest that stairs be at least 36 inches 91 44 cm wide.
When it comes to carpeting stairs the calculations are a little more involved but still doable.
The best carpet for stairs has a low pile inch or less to be both more stable underfoot and resilient to traffic.
The usual allowance for the tread the flat part you step on is 10 and 8 for the riser the back of the stair.
Multiply the square footage of 1 step the number you just calculated by the total number of steps.
In our example you d need a total of 96 square feet 8 9 m 2 of carpeting to cover your stairs.
Carpet no matter the style or weave is generally sold by the square foot or the square yard.
You ll need between 80 and 110 square feet for 13 stairs.